Coolamon concrete
tanks are designed and constucted with the highest quality
concrete, steel,
waterproofing agents and other materials that can be
used. On completion all tanks are sealed and
lined on the inside with Silasec which is a cement based
waterproofing agent designed for water tanks.
Tanks are engineered designed to Australian Standards
AS3600 and AS3735 Our work practices are Workcover compliant
and all appropriate safety measures are used while constructing
our tanks.
30,000 LITRE TANK
Diameter: 4.6M Height: 2.27M
Materials Used: 32mpa vibrated concrete,
100mm thick walls, F82 steel mesh in walls and floor
and double layer of F82 in lid, 3 x 150mm concrete filled
piers supporting lid (Engineered to carry vehicular
load) wall and floor steel tied in with Y12 bar
45,000 LITRE TANK
Diameter: 5.55M Height: 2.27M
Materials Used: 32mpa vibrated concrete,
125mm thick walls, F82 steel mesh in walls and floor
and double layer of F82 in lid, 4 x 150mm concrete filled
piers supporting lid (engineered to carry vehicular
load) wall and floor steel tied in with Y12 bar
90,000 LITRE TANK
Diameter: 7.75M Height: 2.27M
Materials Used: 32mpa vibrated concrete,
125mm thick walls, F82 steel mesh in floor and double
layer of F82 in lid, F818 used in walls, 6 x 150mm concrete
filled piers (225mm piers used if vehicular load is
required) wall and floor steel tied in with Y12 bar.
20,000 LITRE TANK
Diameter: 3.8m height 2.27m
Materials Used: 32 mpa vibrated concrete, 125mm walls, F82 steel mesh in walls and floor and double layer of F82 steel mesh in lid, 1 x 225mm concrete filled pier supporting the lid (Engineered to carry vehicular load) wall and floor steell tied in with Y12 bar.
|
|
|
